Roll-on instead of trowel application
WAKOL D 3330 PVC Design Flooring Adhesive
Thanks to the novel technology with WAKOL D 3330 PVC Design Flooring Adhesive, PVC design coverings can be laid fast and comfortably. The special roller included in the combination container easily applies the adhesive thinly and evenly while you remain standing.
When subsequently laying on a levelled, previously primed subfloor, you work into the room, on the laid surface. For priming, use a Wakol standard dispersion primer, also WAKOL D 3074 Primer Concentrate or WAKOL D 3073 Universal Primer. Special priming is not required.
The extremely long open time of 180 minutes allows sufficient time for laying complex patterns, such as marquetry. The flooring can be corrected without further ado, despite the high initial adhesion of the system. The premises can be used directly after laying.
The extremely thin adhesive film rules out any residual impressions from adhesive compressed during laying and during use.
Of course, WAKOL D 3330 PVC Design Flooring Adhesive is very low in emissions according to EMICODE EC1.
Further information is available at www.wakol.de and +49 6331/8001-0.